You searched for all products made by SUMITOMO ELECTRIC CARBIDE
Standard Pricing: $231.75
Your Cost: 2 pieces available at this price
* Whole number only
A1166K-12.7mm (1/2") dia Maximiza solid carbide 3 flute drill. This drill is ideal for short chipping materials especially difficult to machine materials such as Super alloys (Ni-and Co based materails).
|
Standard Pricing: $11.15
Your Cost: $5.31
You Save: $5.84 (52 %)
* Whole number only
APMT103504PDER Z310 IS A TIN/AI COATED milling insert designed for cast iron machining.
|
Standard Pricing: $11.15
Your Cost: selling below cost
* Whole number only
APMT103508PDERH Z350 Heavy honed Sumitomo multi coated carbide milling inserts are designed for the heaviest milling operations where toughness is required (due to chipping of the milling inserts).
|
Standard Pricing: $13.58
Your Cost: $9.94
You Save: $3.64 (27 %)
* Whole number only
AXMT170508PEERG ACK300 is a multi coated milling insert designed for machining of grey, ductile stainless and other exotic steels. This grade is very tough and wear resistant.
|
Standard Pricing: $12.34
Your Cost: 10 available at this price
* Whole number only
CNMA643-AC325 this turning insert is a very tough multi layered coated insert designed for all interrupted cutting operations. At $1.25 per edge, this steal will be gone soon.
|
Standard Pricing: $8.19
Your Cost: $6.94
You Save: $1.25 (15 %)
* Whole number only
CNMG432EEX EH520Z 19du165, CNMG120408EEX-EH520Z GRADE IS A .031" CORNER RADIUS TURNING INSERT designed for exotic alloys including Titaniums, Waspalloys and other hard to machine materials.
|
Standard Pricing: $8.85
Your Cost: $5.45
You Save: $3.40 (38 %)
* Whole number only
CNMG432EFL-YB100 CNMG432EFLYB100 Carbide Sumitomo turning Insert for turning of gray,ductile and steel materials. This very tough grade is a favorite in many auto parts manufacturers.
|
Your Cost: 10 PIECES LEFT AT THIS PRICE
* Whole number only
The CPMT322ENS AC720 IS A VERY TOUGH MULTI COATED TICN INSERT. The ENS chipbreaker is used for softer gummy steels and stainless where chipbreaking is critical.
|
Standard Pricing: $8.28
Your Cost: 10 PIECES LEFT AT THIS PRICING
* Whole number only
DPMT32.52ESU-T1200A (DPMT11T308SU) TURNING INSERT IS DESIGNED FOR finishing of most all materials. This uncoated cermet will give extremely high surface finishes above .031" depth of cut.
|
Standard Pricing: $630.02
Your Cost: 1 AVAIL
* Whole number only
WAX32000-3.2 2200W7N 2" DIA ALUMINUM CUTTING SHELL MILL
3/4" ARBOR .312"KEYWAY USES ACET16040X STYLE INSERTS
4 TOOTH
RUN AT 2000-4000 SFM (DETURMINED BY SAFTEY OF MACHINE)
.002-010 IPT
7 DEG MAX RAMPING 3.11-3.66 MIN/MAX DIA HELICAL MILLING
|
Standard Pricing: $23.53
Your Cost: 10 PIECES LEFT AT THIS PRICING
* Whole number only
WDXT186012-L-ACK300 Sumitomo indexable drill insert, light honed for Gray cast irons is perfect for all indexalbe drilling operations. The sharp hone is also very good on stainless steels, where a sharp edge is preferred.
|
Standard Pricing: $164.08
Your Cost: $147.48
You Save: $16.60 (10 %)
* Whole number only
WEX20500EW IS A 1/2" 1 FLUTE 90 DEG indexable milling cutter that has 1.309" reach, 3/4" weldon shank and 3.325"oal.
Using the axmt12350x style inserts, this cutter is designed for all materials including steels, cast irons, aluminums, and other mat'ls.
|
Standard Pricing: $164.08
Your Cost: WITH 10 FREE DIAMOND LIKE INSERTS
* Whole number only
WEX20500EW IS A 1/2" 1 FLUTE 90 DEG indexable milling cutter that has 1.309" reach, 3/4" weldon shank and 3.325"oal.
COMES WITH 10 AXMT123508PEFRS-DL1000 style inserts, this cutter is designed for CUTTING NON-FERROUS MATERIALS AND ALL ALUMINUMS.
|
Standard Pricing: $208.26
Your Cost: $188.76
You Save: $19.50 (9 %)
* Whole number only
WEX31000ELW is a 1" indexable 90 degree milling cutter that 4.06" reach, can ramp at 5 degrees and is a 2 flute tool.
Using the axmt17050x style insert sit can be used in all materials.
|
Standard Pricing: $183.01
Your Cost: $165.17
You Save: $17.84 (10 %)
* Whole number only
WEX31000EW is a 1" 2 flute indexable 90 degree milling cutter that has 1.53" reach, can ramp at 5 degrees.
Using the axmt17050x style insert sit can be used in all materials. 1" weldon shank, 3.811"oal,
|
Standard Pricing: $387.23
Your Cost: $368.10
You Save: $19.13 (5 %)
* Whole number only
WEX31250ELC IS A 1 1/4" X 10 "OAL 3 FLUTE Indexable 90 degree milling cutter designed for up to 3 degrees raming and can reach 3.149". It has a 1 1/4" weldon shank and is designed for machining all materials. It uses the AXMT17050X STYLE INSERTS.
|
|
|
Standard Pricing: $303.85
Your Cost: $288.65
You Save: $15.20 (5 %)
* Whole number only
The WEX32000R is a 2" indexable 90 degree facemill with a 3/4" arbor hole and a 1 degree ramp angle. It is a 5 flute tool that uses the AXMT17050X STYLE inserts for machining of all materials.
|
Standard Pricing: $576.80
Your Cost: $548.60
You Save: $28.20 (5 %)
* Whole number only
The WFXF43000R IS A 3" 1" arbor shoulder milling cutter designed with square-4 cornered inserts. The 4 flute tool is designed for the SOMT/SOET12040X STYLE inserts for use in steels, cast , stainless and non-ferrous materials.
|
Standard Pricing: $390.73
Your Cost: 2 AVIALABLE AT THIS PRICE
* Whole number only
The WGX42000R is a 2" 3 flute shell mill with a 3/4" arbore and has a 45 degree lead angle. Using the semt13t3 style inserts and the XEEW WIPER inserts it can provide superior surface finishes in most materials.
|