The Full line of carbide turning and milling inserts from Sumitomo, Walters, Widia, Vardex and many others.
|
|
|
 This area contains all CCMT,CCGT,AND CCMM carbide inserts
|
 Sumitomo, Walter and Widia Carbide turning inserts
|
|
 Sumitomo,Walter,Widia CPMT/CPGM/CPMM Carbide inserts
|
 Sumitomo, Walter, Widia and other DCGT/DCGM/DCGA Carbide inserts.
|
|
|
 DNMG AND DNMA TURNING INSERTS
|
|
|
|
|
| |
Standard Pricing: $15.60
Your Cost: $9.91
You Save: $5.69 (36 %)
16ER11.5NPT GP6 (3ER11.5NPT GP6) Toolflo 11.5 NPT threading insert to fit all 16er or 3er external threading toolholders.
|
Standard Pricing: $15.60
Your Cost: $9.91
You Save: $5.69 (36 %)
16NR11.5NPT GP6 (3IR11.5NPT GP6) Toolflo 11.5 NPT threading insert to fit all 16NR or 3IR internal threading toolholders.
|
Standard Pricing: $30.67
Your Cost: $29.30
You Save: $1.37 (4 %)
20056 "N9 Insert;90°NC Spot Drlll ;L:11.11 (0.433"");S:3.97 (0.156"");Re:0.3 (0.012"")
Dmax:14 (0.551"");Tmax:7 (0.276"")
Coating:TiAlN;Grade:K10F
Holder Series Used:99616-14-xxx"
|
Standard Pricing: $16.02
Your Cost: $9.93
You Save: $6.09 (38 %)
14U2ALX Sumitomo AOMT170524PEERR-G-ACU2500 Milling inserts with .094" radius for Steels, Stainless Steels, Cast iron and super alloys.
|
Standard Pricing: $12.99
Your Cost: 4 PIECES PRICED TO SELL
CPMM432ENS-A30N IS DESIGNED AS AN UNCOATED STEEL GRADE TURNING AND BORING INSERT. This unique chipbreaker break up most materails into manageable chips.
|
Standard Pricing: $20.71
Your Cost: WHILE SUPPLIS LAST
SECO DNMG432-M3 TPAC820P INSERT # 00038501 is a steel grade (P20-P30) insert Tin coated for use in Semi-Roughing to Light rouging (.20-.120") depths of cut at Moderate to high speed rates (905 to 1225 sfm). Feed rates at .006"-.024".
|
Hitachi EDEW13T4TN-15 TB6045 grade inserts are used in IASR32 and 40mm, 50mm or 1.250 and 1.5"and 2" milling cutters to rough 50rc materials at high speeds.grade inserts are used in IASR32 and 40mm, 50mm or 1.250 and 1.5"and 2" milling cutters.
|
Hitachi Carbide insert EDMT15T4TN-15 JX1015 is a TiAlnBn coated High speed milling grade insert used in most materials. This high performance grade is designed to be very wear resistant in High Speed Milling applications. Fits IASR AND ASR cutters.
|
Hitachi Carbide insert JDMT100308R PTH30E is a milling grade insert used for tool, mold and stainless steels. This general purpose grade is designed to be very tough in High Speed Milling applications.
|
Your Cost: 6 PIECES AVAILABLE
SNMM866EHP-AC25 is an exceptionally heavy duty milling/turning insert.
This single sided insert has a deep dish to allow 1/4" or more depth of cuts in most materials.
|
Your Cost: inventory reduction item -selling below cost
The snmg432 nm4 (snmg120408-nm4) wap20 insert is primarily used in Steels and Cast Iron materials.
| |