We supply a full line of carbide cutoff inserts with no lead angles up to 18 degree lead angles. Many of them have Corner radius ground on the corners, or can come sharp for soft materials.
This category holds a full line of cutoff inserts available.
 Widia Manchester classic separator inserts are a good general purpose cutoff inserts for carbon steels, alloy steels and most stainless steels. This insert performs well as moderate to low speeds and feeds.
|
 Widia/Manchester Double end, SX cutoff inserts give you the highest feed /speed combination of any cutoff system in the industry. The chip control geometry offers superior finish and flatnes. This very free cutting insert extends tool life and the Doubl
|
 These exceptionally strong edged cutoff inserts are great in most cutoff applications. They come standard with .010" to .015" corner radius and can come in 0 and 5deg. right hand lead angles.
|
 The Manchester F2 cutoff inserts offer superior flatness and finish on a wide variety of materials. Ideal for thick wall parts or cutting off of large diameter parts to center.
|
 High Positive rake with more open chip breakers for increased speeds and feeds at moderate to high speeds.
|
 Widia/Manchester G2 Cutoff Inserts work well in moderate speeds and feeds
|
 Widia Manchester PL style cutoff inserts are designed for inexpensive cutoff operations. They are used to replace empire blade style cutoff.
|
 Widia Manchester X2 Cutoff Inserts
|
 Manchesters GT cutoff and Grooving inserts come standard with .010" corner radius and 0 deg. lead angle and provied the ability to groove then cutoff with one insert.
|
Standard Pricing: $36.61
Your Cost: $23.39
You Save: $13.22 (36 %)
2FI-187-10W SIMILAR (MANCHESTER #503-105 C6 is similar to FI-187-10 cutoff inserts (501-130). This insert is a 3/16" width of cut 1" depth of cut butt brazed carbide wafter tipped insert for Manchester T series cutoff toolholders.
|
Standard Pricing: $36.61
Your Cost: $23.39
You Save: $13.22 (36 %)
2FI-187-6 SIMILAR (MANCHESTER #501-129-20 C2) is a 3/16" width of cut 5/8" depth of cut butt brazed carbide wafter tipped insert for Manchester T00 series cutoff toolholders.
|
Standard Pricing: $36.61
Your Cost: $23.39
You Save: $13.22 (36 %)
2FI-187-10W SIMILAR (MANCHESTER #503-105 C5 is similar to FI-187-10 cutoff inserts (501-130). This insert is a 3/16" width of cut 1" depth of cut butt brazed carbide wafter tipped insert for Manchester T series cutoff toolholders.
|
Standard Pricing: $18.53
Your Cost: $11.99
You Save: $6.54 (35 %)
507-124-36 FC187-R4 GP26 1/8" WIDE 4 DEG RH LEAD ANGLE TIN COATED SEPERATOR STYLE CUTOFF INSERT 3540479
|
Standard Pricing: $17.91
Your Cost: $11.26
You Save: $6.65 (37 %)
507-125-36 This insert is obsolete at Widia/Manchester. They make conversion components to their new WGC system. Call 877-737-8665 (877-PDQ-TOOL) of plug and play options.
FC187L4 TIN COATED 3/16" WIDE 4 DEG LEFT HAND LEAD CUTOFF INSERTS
|
Standard Pricing: $19.62
Your Cost: $12.33
You Save: $7.29 (37 %)
507-128-34 FC125R4 4 DEG RH LEAD 1/8" SEPERATOR STYLE CUTOFF INSERTS ALTIN COATED 3540497
|
Standard Pricing: $17.48
Your Cost: $12.09
You Save: $5.39 (31 %)
507-128-36 1/8" woc x 4 degree right hand lead angle classic separator insert FC125R4 GP26 TIN COATED.
This all time favorite cutoff insert is out of the PVD Tin coated M40 grade for low to medium speed cutoff (50-250SFM).
|
Standard Pricing: $21.50
Your Cost: $12.16
You Save: $9.34 (43 %)
507-128-37 3540499 SEPERATOR STYLE FC125R4 AP26 1/8" WIDE 4DEG RH LEAD ALTIN COATED CUTOFF INSERT
|
Standard Pricing: $17.48
Your Cost: $11.49
You Save: $5.99 (34 %)
507-143-36 3540544 FC094-R4 3/32" 4 DEG RH LEAD TIN COATED SEPARATOR STYLE CUTOFF INSERT
|
Standard Pricing: $18.27
Your Cost: 160 pieces left then obsolete
3540582 507150 m40 or 507-150-36 Widia/Manchester classic separator cutoff insert 4mm (.157") wide 4 degree left hand lead angle m40 grade is a tough carbide that can take being run at low surface footage and unrigid set ups.
|
Standard Pricing: $18.61
Your Cost: $12.16
You Save: $6.45 (35 %)
507-151-36 3540589 FC094-R12 GP26 3/32" WIDE 12 DEG RH LEAD TIN COATED CUTOFF INSERT SIMILAR TO THE SEPERATOR
|
Manchester 519-119-50 FI-250-20CC IS A C5 1/4"width, 2"doc ground chip control insert which is interchangeable with all fi-250-20 pockets.This is for the Manchester T100 Toolholder system.
|
Manchester FI-187-15CC IS A C2 3/16"width, 1.5"doc ground brazed carbide insert. This is interchangeable with all FI-187-15 pockets.This is for the Manchester T100 Toolholder system. Primary use is for Cast Iron, Stainless Steel, and exot
|
Manchester 519-101-50 (501-134-50) FI-187-15CC IS A C5 3/16"width, 1.5"doc ground chip control insert which is interchangeable with all fi-187-15 pockets.This is for the Manchester T100 Toolholder system.
|
Standard Pricing: $36.61
Your Cost: $19.39
You Save: $17.22 (47 %)
These origninal Manchester FI-250-10 T/2W C5 inserts are for use in the Manchester T100- T300 cutoff toolholders. This insert is a 1/4" woc, 1"depth of cut insert. The carbide wafer is smaller than the similar FI-250-10 insert #501-144-50.
|
Standard Pricing: $36.61
Your Cost: $23.39
You Save: $13.22 (36 %)
These origninal Manchester 501-144-70 FI-250-10 C7 inserts are for use in the Manchester T100- T300 cutoff toolholders. This insert is a 1/4" woc, 1"depth of cut insert. Similar to FI-250-10 insert #501-144.
|
Standard Pricing: $54.61
Your Cost: $18.45
You Save: $36.16 (66 %)
The PDQ507-246wgc1 is the EXLUSIVE WGC replacment for the Manchester 507-247 inserts. It is a 1/8" woc x 12deg rh lead NO BACK TAPER cutoff special insert.
|
Standard Pricing: $54.61
Your Cost: $18.45
You Save: $36.16 (66 %)
The PDQ507-247wgc2 is the EXLUSIVE WGC replacment for the Manchester 507-246 inserts. It is a 1/8" woc x 18deg rh lead NO BACK TAPER cutoff special insert.
|
Standard Pricing: $4.22
Your Cost: $3.02
You Save: $1.20 (28 %)
PFT03 2000
|
Standard Pricing: $4.94
Your Cost: $3.52
You Save: $1.42 (29 %)
PFT04 2000
|
Standard Pricing: $5.67
Your Cost: $4.04
You Save: $1.63 (29 %)
PFT05 2000
|
Standard Pricing: $11.31
Your Cost: $7.81
You Save: $3.50 (31 %)
WCFL2T AC830P
|
Standard Pricing: $11.43
Your Cost: $7.91
You Save: $3.52 (31 %)
WCFL3A A30
|
Standard Pricing: $13.70
Your Cost: $9.49
You Save: $4.21 (31 %)
WCFL3A 225
|
Standard Pricing: $13.06
Your Cost: $9.04
You Save: $4.02 (31 %)
WCFL3 AC830P
|
Standard Pricing: $11.43
Your Cost: $7.91
You Save: $3.52 (31 %)
WCFL3A G10E
|
Standard Pricing: $11.43
Your Cost: $7.91
You Save: $3.52 (31 %)
WCFL3A T130A
|
Standard Pricing: $11.43
Your Cost: $7.91
You Save: $3.52 (31 %)
WCFL3B G10E
|
Standard Pricing: $12.58
Your Cost: $8.69
You Save: $3.89 (31 %)
WCFL4A A30
|
Standard Pricing: $14.94
Your Cost: $10.32
You Save: $4.62 (31 %)
WCFL4A 225
|