Standard Pricing: $991.98
Your Cost: 1 piece at this price
This M6800 4" 90 deg square shell mill is perfect for all your shoulder milling needs. 9 flute, 1 1/2" arbor hole, coolant through capabilities. AKA 15396452800
|
Standard Pricing: $405.82
Your Cost: selling below cost inventory reduction
3577770 15396464400 1.50" M6800 Insertable Endmill
2-Flute, 1.250" Shank, 9.449" OAL
2.579" Reach, Coolant Thru
Use BDGT/BDMT11T3 Inserts
|
Standard Pricing: $33.11
Your Cost: $10.80
You Save: $22.31 (67 %)
BDMT11T308ER-ML TN6430 .031"corner rad, M6800 MILLING INSERT .031"CORNER RADIUS. PRIMARILY FOR STEEL, CAST IRON AND EXOTIC MATERIALS.
|
Standard Pricing: $33.11
Your Cost: $10.80
You Save: $22.31 (67 %)
BDMT11T312ER-ML TN6430 .047"corner rad, M6800 MILLING INSERT .047"CORNER RADIUS. PRIMARILY FOR STEEL, CAST IRON AND EXOTIC MATERIALS.
|
Standard Pricing: $746.18
Your Cost: $374.56
You Save: $371.62 (50 %)
M1200D300Z05S100HN09 45 Degree M1200 3.0" Facemill 5 flute 1" arbor hole facemill. Uses Insert HNPJ or HNGJ535AN 12 Cutting Edges,.177" DOC, For high feed milling.
|
Standard Pricing: $499.21
Your Cost: inventory reduction item
3786393 (15396471000) 2.5" Indexable Widia 90 degree m6800 5 FLUTE shoulder mill 3/4" ARBOR PILOT, Coolant throught uses bdgt/bdmt1704 style inserts
|
Standard Pricing: $11.15
Your Cost: $5.31
You Save: $5.84 (52 %)
APMT103504PDER Z310 IS A TIN/AI COATED milling insert designed for cast iron machining.
|
Standard Pricing: $11.15
Your Cost: selling below cost
APMT103508PDERH Z350 Heavy honed Sumitomo multi coated carbide milling inserts are designed for the heaviest milling operations where toughness is required (due to chipping of the milling inserts).
|
Standard Pricing: $11.02
Your Cost: 10 PIECES AT THIS PRICE
CCGT21.50.5MEFC-AC1030U (CCGT060202MN-FC AC1030U is designed for high speed swiss turning of steels, stainless, cast irons and exotic alloys. This grade is exceptionally wear resistant with a 20 hardness.
|
Standard Pricing: $12.34
Your Cost: 10 available at this price
CNMA643-AC325 this turning insert is a very tough multi layered coated insert designed for all interrupted cutting operations. At $1.25 per edge, this steal will be gone soon.
|
Standard Pricing: $10.54
Your Cost: 10 PIECES LEFT AT THIS PRICE
CNMG432EEX EH520Z 19du165, CNMG120408EEX-EH520Z GRADE IS A .031" CORNER RADIUS TURNING INSERT designed for exotic alloys including Titaniums, Waspalloys and other hard to machine materials.
|
Standard Pricing: $8.85
Your Cost: $5.45
You Save: $3.40 (38 %)
CNMG432EFL-YB100 CNMG432EFLYB100 Carbide Sumitomo turning Insert for turning of gray,ductile and steel materials. This very tough grade is a favorite in many auto parts manufacturers.
|
Standard Pricing: $11.38
Your Cost: 10 PIECES AT THIS PRICE
CNMG432EFL YB100CNMG432EFL-YB100 Carbide Sumitomo turning Insert for turning of gray,ductile and steel materials. This very tough grade is a favorite in many auto parts manufacturers.
|
Standard Pricing: $11.38
Your Cost: 10 PIECES LEFT AT THIS PRICE
CNMG432EMU-AC810P, CNMG120408MU-AC810P IS an extremely hard steel high speed turning grade designed for optimum tool life in the medium roughing of non-interrupted steels and stainless steels. This is a P01-P10 grade hardness.
|
Standard Pricing: $11.38
Your Cost: 10 PIECES AT THIS PRICE
CNMG432EMU 830P (CNMG120408MU-AC830P) is a very tough turing insert designed for interrupted cutting of all steels and stainless steels. The 30 hardness is designed for heavy roughing under adverse conditions.
|
Standard Pricing: $11.38
Your Cost: 20 pieces left at this pricing
CNMG432EUX-AC410K (CNMG120408-UX) IS A coated grade designed for high speed cast iron and stainless machining.
|
Standard Pricing: $18.86
Your Cost: 10 PIECES LEFT AT THIS PRICING
CPGT25151 T3000Z CPGT2.51.51 (CPGT080204) .0156" CORNER radius insert is designed for finishing of interrupted steels and stainless steels. This cermet is one of the toughest cermets manufactured and is coated for extreme tool life in hard to finish appl
|
Your Cost: 10 PIECES LEFT AT THIS PRICE
The CPMT322ENS AC720 IS A VERY TOUGH MULTI COATED TICN INSERT. The ENS chipbreaker is used for softer gummy steels and stainless where chipbreaking is critical.
|
Standard Pricing: $8.28
Your Cost: 10 PIECES LEFT AT THIS PRICING
DPMT32.52ESU-T1200A (DPMT11T308SU) TURNING INSERT IS DESIGNED FOR finishing of most all materials. This uncoated cermet will give extremely high surface finishes above .031" depth of cut.
|
Standard Pricing: $289.57
Your Cost: 1 piece left at this price
KDS175MAV 17.5mm brazed carbide coolant thru drill
|
Standard Pricing: $513.29
Your Cost: inventory reduction item
3953898 M1200D100Z03C075HN07L480 1"DIA. 3 FLUTE M1200 MINI 12 edge milling cutter.
1" diameter, 1.343 D1 Max diameter, 3/4" shank 3 flute
4.80"oal mini mill. .138" max doc.
|
Standard Pricing: $642.84
Your Cost: 2 PIECES LEFT AT THIS PRICE
4136462 M1200D150Z05S050HN07 is a 1.50" M1200 coolant through Mini-Shell Mill 5 flute, 1/2" pilot arbor , Uses HNPJ/HNGJ07 12 edge Inserts. Ideal for facemilling, corner chamfering. Max rpm 15,800
|
Standard Pricing: $70.82
Your Cost: 5 left at this price
MDS045SP 4.5MM STUB SOLID CARBIDE multicoated DRILL priced to sell out quickly. This drill is designed for All steels, stainless steels, cast iron materials. The design changed making these drills obsolete.
|
Standard Pricing: $673.06
Your Cost: selling below cost
MDS175DMHV 17.5mm solid carbide drill w/ coolant through capabilities.
|
Standard Pricing: $155.43
Your Cost: 1 piece left at this pricing
MDS3906MP Medium Length .3906" diameter solid carbide drill. 9.92mm dia x 1.969 flute length, 4.17" oal coated drill for all materials.
|
Standard Pricing: $20.63
Your Cost: 100 pcs overage selling well below cost
QPKA53MT A30N this milling insert is a hard to find item.
|
Standard Pricing: $10.52
Your Cost: selling below cost for inventory reduction
SDKN42MT ACZ350 is a VERY tough milling insert designed for the machining of heavily interrupted materials. The toughness is in the P50 range which is one of the highest ratings for toughness.
|
Standard Pricing: $23.75
Your Cost: selling below cost for inventory reduction
SPCH53TRR AC330 multilayered coated Sumitomo carbide milling inserts is a very tough insert designed for the most demanding milling operations.
|
Standard Pricing: $11.31
Your Cost: selling below cost inventory reduction
TBGP520R T12A (TBGT520R T12A) is a cermet turning and boring insert. Cermets are designed for premium surface finishes in boring applications.
T12A is a hard cermet, so it is made for slight or non interrupted cutting.
|
Standard Pricing: $13.84
Your Cost: 40 left then they are gone!
TNMG433ENZ-AC110G is a high speed cast iron grade turning insert. This insert is designed for extreme wear resistance in all Grey and most Ductile cast iron materials. The periphery chipbreaker is designed to help with ductile machining.
|