Your Cost: 5 PIECES MINIMUM ORDER QTY
* Whole number only
Solid brass 15.6mm (.616") round connector to Loc-Line flexable tubing
|
Your Cost: 5 PIECES MINIMUM ORDER QTY
* Whole number only
Solid brass 15.6mm (.616") round connector to Snap-Loc flexable tubing
|
Your Cost: 5 PIECES MINIMUM ORDER QTY
* Whole number only
Solid brass 15mm (.591") round connector to Loc-Line flexable tubing
|
Your Cost: 5 PIECES MINIMUM ORDER QTY
* Whole number only
Solid brass 15mm (.591") round connector to Snap-Loc flexable tubing
|
Your Cost: 5 PIECES MINIMUM ORDER QTY
* Whole number only
Solid brass 16mm (.630") round connector to Loc-Line flexable tubing
|
Your Cost: 5 PIECES MINIMUM ORDER QTY
* Whole number only
Solid brass 16mm (.630") round connector to Snap-Loc flexable tubing
|
Standard Pricing: $12.99
Your Cost: 4 PIECES PRICED TO SELL
* Whole number only
CPMM432ENS-A30N IS DESIGNED AS AN UNCOATED STEEL GRADE TURNING AND BORING INSERT. This unique chipbreaker break up most materails into manageable chips.
|
Standard Pricing: $8.00
Your Cost: $5.54
You Save: $2.46 (31 %)
* Whole number only
CPMT25152ESU 610M
|
Standard Pricing: $8.00
Your Cost: $5.54
You Save: $2.46 (31 %)
* Whole number only
CPMT25152ESU 630M
|
Your Cost: while supplies last
* Whole number only
DCMT32.52 DA150 Inserts are made for most diamond applications.
The Sumitomo DA150 grade is a used for high speed machining of aluminum, copper, wood, graphite, rubber and carbides.
|
Standard Pricing: $20.71
Your Cost: WHILE SUPPLIS LAST
* Whole number only
SECO DNMG432-M3 TPAC820P INSERT # 00038501 is a steel grade (P20-P30) insert Tin coated for use in Semi-Roughing to Light rouging (.20-.120") depths of cut at Moderate to high speed rates (905 to 1225 sfm). Feed rates at .006"-.024".
|
Standard Pricing: $16.82
Your Cost: inventory reduction item -selling below cost
* Whole number only
DNMG432MU KC9125 IS A PREMIUM multi layer coated insert for used in steels and high temp alloys.
|
Standard Pricing: $12.60
Your Cost: $6.88
You Save: $5.72 (45 %)
* Whole number only
Hitachi EPMT0603TN8 GX2030 is a premium coated carbide insert used for high speed milling of steels and exotic materials.
|
Standard Pricing: $20.55
Your Cost: $9.89
You Save: $10.66 (52 %)
* Whole number only
2957552 HPPR225DZENG-D TN6540 m640 MILLING INSERT HPPT06T3DZENGD-TN6540, FOR STEELS AND STAINLESS STEELS.
|
Standard Pricing: $625.00
Your Cost: 1 piece left at this pricing
* Whole number only
6" IAR SERIES FACEMILL HITACHI
|
Standard Pricing: $309.00
Your Cost: 1 piece left at this pricing
* Whole number only
3.0" IASF Series Face Mill 4-Flute, 1.0" Pilot, .380 Key
Use Insert SDNW/SDMT1505 Insert Screw 555-141
|
Standard Pricing: $223.26
Your Cost: 2 Left at this pricing
* Whole number only
1.250" IASR Insertable Endmill 5-Flute, 1.25" Shank, 8.0" OAL 1.250" IASR Insertable Endmill 5.00" Reach, Coolant Thru Use EPMT/EPNW0603 Inserts Use Insert Screw 250-141
|
Standard Pricing: $229.64
Your Cost: 1 piece left at this pricing
* Whole number only
4-Flute, 1.850 Pilot, .315 Key 2" IASR Hitachi cutter
|
Standard Pricing: $11.55
Your Cost: $6.10
You Save: $5.45 (47 %)
* Whole number only
Hitachi JDMT150530R PTH30E is a premium coated carbide insert used for high speed milling of steels and exotic materials.
|
Standard Pricing: $513.29
Your Cost: inventory reduction item
* Whole number only
3953898 M1200D100Z03C075HN07L480 1"DIA. 3 FLUTE M1200 MINI 12 edge milling cutter.
1" diameter, 1.343 D1 Max diameter, 3/4" shank 3 flute
4.80"oal mini mill. .138" max doc.
|